• HVBP12050 (12” x 50’)
• HVBP16050 (16” x 50’)
• HVBP24050 (24” x 50’)
• HVBP36050 (36” x 50’)
• HVBP48050 (48” x 50’)
• HVBP60050 (60” x 50’)
• HVBP12100 (12” x 100’)
• HVBP16100 (16” x 100’)
• HVBP24100 (24” x 100’)
• HVBP36100 (36” x 100’)
• HVBP48100 (48” x 100’)
• HVBP60100 (60” x 100’)
• HVBP12125 (12” x 125’)
• HVBP16125 (16” x 125’)
• HVBP24125 (24” x 125’)
• HVBP36125 (36” x 125’)
• HVBP48125 (48” x 125’)
• HVBP60125 (60” x 125’)

• R-5.6
• Easy to handle and cost less to install
• Non-toxic / non-carcinogenic
• Environmentally safe, lightweight and clean
• Not affected by moisture or humidity
• Resists growth of fungi, mold and mildew
• No need for protective garments or respirators when installing
• When sealed properly, aids in reducing duct leakage

Reflectix® products are thoroughly tested. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. For a copy of an actual test report, please e-mail us at customerservice@reflectixinc.com or call at 800-879-3645.

• Refer to the two diagrams above.
• Make sure all sheet metal joints, seams and penetrations are sealed.
• Wrap and secure spacer material to the duct in a candy cane fashion. Proceed down the duct in one direction with a repeat of the wrap at 12” intervals. Use UL 181 Acrylic Adhesive Foil Tape to fasten the spacer in place.
• Verify the circumference of the duct with the spacer strip in place.
• Cut the Reflectix® product to this length plus 1”.
• Wrap the product around the duct and securely tape the linear and circumference seams (overlapping 1”- 2”) with UL 181 Acrylic Adhesive Foil Tape (goal is an air-tight, snug seam seal).
• Do not leave any exposed duct or space where air can enter between the duct and the Reflectix®.

There are a wide variety of terms and words associated with the Reflectix® family of products. Those in common usage are itemized below in two categories - Products & Applications.

Products: Reflective Insulation, Radiant Barrier, Cathedral Ceiling Insulation, Crawl Space Insulation, Concrete Slab Insulation, Duct Insulation Indoors, Duct Insulation Outdoors, Duct Insulation Spacers, Expansion Joint, Knee Wall Insulation, Pipe Wrap Insulation, Radiant Floor Insulation, Return Air Duct Panning, Wall Insulation, Water Heater Insulation, Metal Building Insulation, Post and Frame Building Insulation, Foil Tape, Metalized Tape, White Poly Tape, Sill Sealer, Foil Insulation, Foil Radiant Barrier, Bubble Pack Insulation, Bubble Insulation, HVAC Insulation, Easy to Install Insulation, No Itch Insulation, Energy Saving Products, Energy Efficient Products. Also, Products/Terms within our industry include: Low-e Coatings, Radiant Barrier Paint, Radiation Control Coatings, Radiant Barrier Plywood, Radiant Barrier Decking, Radiant Barrier Chips, Radiant Barrier Tax Credit.

Applications: Attic, Behind Hot Water Radiator, Cathedral Ceiling, Concrete Slab, Crawl Space, Duct Indoors, Duct Outdoors, Expansion Joint, Garage Door, House Wrap, Knee Wall, Pipe Wrap, Radiant Floor, Snow Melt, Sill Sealer, Storage Buildings, Exterior Wall, Masonry Wall, Water Heater, Wine Room, Work Shop, Agricultural Building, Commercial Building, Return Air Panning, Metal Building Roof, Metal Building Wall, Post and Frame Building Roof, Post and Frame Building Wall.