Metal Building - Product: Reflective One Side
Metal Building - Wall - New
Open Interior with a 3/4” Thermal Break R-4.6* Heat Flow Horizontal Open Interior with a Nominal 3/4” Drape in Product (No Thermal Break) R-3.7* Heat Flow Horizontal
 Reflectix® Insulation products are a technologically advanced Insulation material
ideal for new construction or retrofit applications in commercial,
industrial, metal and post/frame buildings. Our products are recognized
for their thermal performance, easy installation, versatility, price
and environmental friendliness. Recommended Products:
Single Reflective Insulation Reflective/Bubble/Bubble/White - Roll
• RDBW48100 (48” x 100’)
Benefits:
• Easy to handle and install • Convenient roll sizes • Class A / Class 1 Fire Rating • Inhibits dew point condensation • Vapor retarder (0.02 perms) • Does not compress, collapse or disintegrate • Non-toxic / non-carcinogenic
Testing and Certification:
Reflectix®
products are thoroughly tested at either nationally approved
independent laboratories or leading universities. Tests are performed
to current American Society of Testing and Materials (ASTM) standards
when a standard exists. For a copy of an actual test report, please
e-mail us at customerservice@reflectixinc.com or call at 800-879-3645.
Air Space Requirements:
Installation Instructions: (There are 2 options) Download Metal Building - Wall - New Installation Instructions.pdf 1. Installed with 3/4” Thermal Breaks
• The Reflectix® Insulation is installed with the “white side” towards the interior of the building. •
Install Reflectix® Reflective/Bubble/Bubble/White product vertically, using 1
1/4” self tapping screws to secure the insulation to the exterior of
the C or Z girts. • Tape the seams with a Reflectix® Foil Tape (goal is an air-tight, snug seam seal). • Install a 3/4” thermal break and attach corrugated metal exterior finish.
2. Installed with a 3/4” Drape in Product (No Thermal Break)
• Per instructions above without the thermal break. • When installing the product, insure there is a drape (towards the interior) of at least 3/4” at the center of the cavity.
* Includes thermal resistance of 0.68 interior air film.
Calculation Disclaimer: All values are calculated based on the “ASHRAE Handbook of Fundamentals”.
Important:
Additional Resources:
There are a wide variety of terms and words associated with the Reflectix® family of products. Those in common usage are itemized below in two categories - Products & Applications.
Products: Reflective Insulation, Radiant Barrier, Cathedral Ceiling Insulation, Crawl Space Insulation, Concrete Slab Insulation, Duct Insulation Indoors, Duct Insulation Outdoors, Duct Insulation Spacers, Expansion Joint, Knee Wall Insulation, Pipe Wrap Insulation, Radiant Floor Insulation, Return Air Duct Panning, Wall Insulation, Water Heater Insulation, Metal Building Insulation, Post and Frame Building Insulation, Foil Tape, Metalized Tape, White Poly Tape, Sill Sealer, Foil Insulation, Foil Radiant Barrier, Bubble Pack Insulation, Bubble Insulation, HVAC Insulation, Easy to Install Insulation, No Itch Insulation, Energy Saving Products, Energy Efficient Products. Also, Products/Terms within our industry include: Low-e Coatings, Radiant Barrier Paint, Radiation Control Coatings, Radiant Barrier Plywood, Radiant Barrier Decking, Radiant Barrier Chips, Radiant Barrier Tax Credit.
Applications: Attic, Behind Hot Water Radiator, Cathedral Ceiling, Concrete Slab, Crawl Space, Duct Indoors, Duct Outdoors, Expansion Joint, Garage Door, House Wrap, Knee Wall, Pipe Wrap, Radiant Floor, Snow Melt, Sill Sealer, Storage Buildings, Exterior Wall, Masonry Wall, Water Heater, Wine Room, Work Shop, Agricultural Building, Commercial Building, Return Air Panning, Metal Building Roof, Metal Building Wall, Post and Frame Building Roof, Post and Frame Building Wall.
|