Do-It-Yourself (DIY)
Wall - Exterior (2”x 4” Construction)



R-14 Total Assembly (R-3.9 and a Vapor/Moisture Barrier for the Reflectix®)

For the Do-It-Yourselfer, this application is an excellent upgrade for an exterior 2”x 4” stud wall (new construction). The product provides a vapor/moisture barrier, which is a strong contributor to the efficiency of the system. Reflectix® is available in convenient roll sizes which contributes to ease of handling and installation.

Recommended Products:
Double Reflective Insulation
Reflective/Bubble/Bubble/Reflective - Roll
• BP24025 (24” x 25’)
Staple Tab, Reflective/Bubble/Bubble/Reflective - Roll
• ST16025 (16” x 25’)
• ST24025 (24” x 25’)

Benefits:
• R-14 total assembly (R-3.9 for the Reflectix®)
• Vapor retarder and moisture barrier
• Installs quickly and easily
• Additional product cost pays for itself over time
• Resists growth of fungi, mold and mildew
• Non-toxic / non-carcinogenic

Testing and Certification:
Reflectix® products are thoroughly tested at either nationally approved, independent laboratories or leading universities. Tests are performed to current American Society of Testing and Materials (ASTM) standards when a standard exists. To obtain a copy of our Product Testing Specifications, please refer to our website “Literature Tab” above. The documents are also available by e-mail at customerservice@reflectixinc.com or call 800-879-3645.

Air Space Requirements:

Federal Trade Commission Fact Sheet: Installation Instructions:
Download DIY Wall - Exterior (2 x 4) Installation Instructions 0714.pdf
• Install R-13, un-faced, per manufacturer’s specifications.
• Place one corner edge of the Reflectix® in an upper corner of the stud cavity. Staple the product to the side of the stud (creating a 3/4” tab on the product and compressing into the fiberglass (3/4” as well)). The edge of the product should be flush with the forward corner of the stud.
• Proceed “down” stapling to the side of the stud every 2"- 3”.
• Repeat procedure on opposite stud.
• The Goal: Create a continuous 3/4” air space between the product and the interior panel.
• Finish wall interior.

Important:

Additional Resources:
Zip Code Zone Locator
This function provides regional installation recommendations for the following applications: Attic & Cathedral Ceiling
Submit
DIY Product Calculator Type:
Roof/Attic Application: Radiant Barrier Locate a Retailer
0 sq. ft. of roof/attic area 0 rolls
*Note: This calculator is for the convenience of our customers. These recommendations are for approximate product quantity.

Video Library:

For additional videos, click here.
  • Attic
  • Crawl Space R-21
  • Crawl Space R-16
  • HVAC Ducts - DIY Installer
  • A Products Introduction