Products

Duct Insulation (Big Bubble)

 

About the Product:

The Reflectix® Big Bubble Duct Insulation is an excellent fiber-free alternative to other types of duct insulations. Installers nationwide, attest to the “ease of handling and installation” that contributes to a reduction in labor cost for this product (during installation).  It is installed by wrapping either rectangular or round ductwork in HVAC applications. The Reflectix® Big Bubble Duct Insulation is available through Contractor Sales Groups or Industrial / Commercial Building Products Suppliers.

Description:

  • Reflectix® Big Bubble Duct Insulation (nominal thickness 1”) consists of two layers of highly reflective film (96% reflectivity) that are bonded to two tough layers of polyethylene. Two inner layers of insulating bubbles resist conductive heat flow while a center layer of polyethylene gives Reflectix® high reliability and strength. The product has a tape running the length of the roll for easy identification by code officials. The tape identifies the manufacturer and ASTM Testing: Reflectix® Duct Insulation • ASTM E84 • Class A / Class 1 • ASTM C411 Passed
  • Product Benefits (R-values) are dependent on installation technique.  The Reflectix® Big Bubble Duct Insulation provides an R-8.0 when installed with a 0.75” air gap between the duct and insulation, and R-6.0 when installed direct to the duct without a spacer. Please refer to the webpage that contains the specific application of interest.

Applications:

HVAC/R & Plumbing Contractor

  • Duct Insulation – R-6.0
  • Duct Insulation – R-8.0

Product Codes/Sizes:

HVAC/R & Plumbing Contractor

  • HVBB48075 (48“x 75’) – 300 sq. ft.

Literature:

Click here to link to our product literature library for additional information.